mobile-logo

Aspen Plus (June Batch)

By chemklub Categories: Jun 2022, May 22
Wishlist Share
Share Course
Page Link
Share On Social Media

About Course

This Aspen Plus Course will show you how to model and simulate Processes (From Petrochemical, to Ammonia Synthesis and Polymerization). Analysis of Unit Operation will help you in order to optimize the Chemical Plant. This is helpful for students, teachers, engineers and researchers in the area of R&D and Plant Design/Operation. The course is didactic, with a lot of applied theory and Workshops/Study cases. At the end of the course you will be able to setup a simulation, run it, get results and more important, analysis of the process for further optimization.

What Will You Learn?

  • This Aspen Plus Course will show you how to model and simulate Processes (From Petrochemical, to Ammonia Synthesis and Polymerization).
  • Analysis of Unit Operation will help you in order to optimize the Chemical Plant.
  • This is helpful for students, teachers, engineers and researchers in the area of R&D and Plant Design/Operation.
  • The course is didactic, with a lot of applied theory and Workshops/Study cases.
  • At the end of the course you will be able to setup a simulation, run it, get results and more important, analysis of the process for further optimization.

Course Content

Introduction to Aspen Plus 24/06/2022 and 25/06/2022
: User Interface, Model palets, Unit sets, Help section File type like .bkp, apwz, apw. Templates. Simulation, Properties and all environment

  • 24/6/2022 introductory lecture
    01:16:58
  • Lesson 2 25/6/2022
    55:44

Property Environment -Selection of Physical Property Methods 26/06/2022
Type of component and properties selection. Electrolytic wizard, SFE assistance,

Simulation Environment 28/06/2022
Model Palette, Ribbon options, material Streams, energy stream, Overview of Unit operations

Understanding of Unit operation models in Aspen Plus 30/6/2022 2/07/2022 3/07/2022 4/7/2022
Simulation of Separators -Flash Drum, Mixer/Splitters Calculation of Bubble Point & Dew Point Simulation of Reactor Models Simulation of Reactors-R Stoic,Requilibrium, RGibbs, CSTR, PFR, Specifying Reactions Exchangers-Heater, Cooler, HeatX Simulation of Distillation Models DSTWU, DISTL, RadFrac, Petrofac

Flow sheeting Options
Design Specification Calculators

Model Analysis Tools
Sensitivity analysis Optimization

Equipment Sizing
Column Sizing & Rating (rigorous designing)

Case Studies
2 Case Studies 2 Case Studies

Convergence
Analyze error and warning messages Convergence Methods Tear Stream

Aspen Certification Exam Guidance

Interactive Lecture & Aspen Plus use in Industries

Student Ratings & Reviews

No Review Yet
No Review Yet
Course in Cart0
There are no products in the cart!
Continue shopping
0