Simulation (December Batch)

By chemklub Categories: December 2021

About Course

This Aspen Plus Course will show you how to model and simulate Processes (From Petrochemical, to Ammonia Synthesis and Polymerization). Analysis of Unit Operation will help you in order to optimize the Chemical Plant. This is helpful for students, teachers, engineers and researchers in the area of R&D and Plant Design/Operation. The course is didactic, with a lot of applied theory and Workshops/Study cases. At the end of the course you will be able to setup a simulation, run it, get results and more important, analysis of the process for further optimization.

Model basic chemical processes
Simulate basic industrial processes
Understand the concept of Flowsheet and Manipulate it
Set up the required/basic inputs for a Simulation
Choose the most adequate Method for Physical Properties Modeling
Be able to model the most important/used Unit Operations
Modify all reporting results in order to make analysis

Course Content

Introduction to Aspen Plus
"User Interface, Model palets, Unit sets, Help section File type like .bkp, apwz, apw. Templates. Simulation, Properties and all environment."

Property Environment -Selection of Physical Property Methods
Type of component and properties selection. Electrolytic wizard, SFE assistance, Txy-Pxy diagram of a binary mixtures

Simulation Environment
Model Palette, Ribbon options, material Streams, energy stream, Overview of Unit operations

Understanding of Unit operation models in Aspen Plus
Simulation of Separators -Flash Drum, Mixer/Splitters Calculation of Bubble Point & Dew Point Simulation of Reactor Models Simulation of Reactors-R Stoic,Requilibrium, RGibbs, CSTR, PFR, Specifying Reactions Exchangers-Heater, Cooler, HeatX Simulation of Distillation Models DSTWU, DISTL, RadFrac, Petrofac

Flowsheeting Options
Design Specification Calculators

Model Analysis Tools
Sensitivity analysis Optimization

Equipment Sizing
Column Sizing & Rating

Case Studies
Simulation of Hydroalkylation of Toluene Separation of CO2 from flue Gases using Absorber Simulation of VCM Plant

Convergence
Analyze error and warning messages Convergence Methods Tear Stream

Aspen Certification Exam Guidance
Aspen PLUS user certification registration process Practicing sessions Mock tests

Student Ratings & Reviews

No Review Yet

About Course

What Will You Learn?

Course Content

Introduction to Aspen Plus "User Interface, Model palets, Unit sets, Help section File type like .bkp, apwz, apw. Templates. Simulation, Properties and all environment."

Property Environment -Selection of Physical Property Methods Type of component and properties selection. Electrolytic wizard, SFE assistance, Txy-Pxy diagram of a binary mixtures

Simulation Environment Model Palette, Ribbon options, material Streams, energy stream, Overview of Unit operations

Flowsheeting Options Design Specification Calculators

Model Analysis Tools Sensitivity analysis Optimization

Equipment Sizing Column Sizing & Rating

Case Studies Simulation of Hydroalkylation of Toluene Separation of CO2 from flue Gases using Absorber Simulation of VCM Plant

Convergence Analyze error and warning messages Convergence Methods Tear Stream

Aspen Certification Exam Guidance Aspen PLUS user certification registration process Practicing sessions Mock tests